The Christian Survival Guide Go to the ant, thou sluggard. Consider her ways and be wise. Prov 6:6

4Aug/101

Gear Review – ESEE Lite Machete taking abuse and loving it (Video)

ESEE Knives

ESEE Lite Machete Review - 4.75/5 (My new primary bushcraft blade)

I had been questioning what kind of blade I needed as either a chopper or utility type blade aside from a neck and/or belt knife for several months. I was originally considering the new junglas from ESEE but when I considered the weight vs. utility factor I just didn't see why it was any better than a specialized tool. So I started asking around about hatchets as opposed to large knives and really considering my needs in the bush.

As people started to answer it was evident that large knives were out and the real battle was small axe vs. machete. So I started thinking about my AO and approach and thought to look up some videos on thicker vegetation areas like jungles. That's when I came across Colhane's Youtube Channel. This guy is a machete master! He's a Baptist minister that spends a lot of time in Brazil and leads a kind of outdoor ministry at times that frequents rain forests. Now, whoever of you out there doesn't think the areas I operate in are as thick as jungle, check out the area behind me in the Sitka Review Video. Most importantly from his videos I saw what the machete could do to smaller trees - that is, take them down. I had previously worried about the strength of a machete for serious chopping, but seeing some really thick trees felled quickly with no damage to the blade convinced me enough to try one out. Besides, even the most expensive machetes are half the cost of a good belt hatchet.

I had seen that ESEE was producing a new 18" machete (23" OAL) and being a bit of a fanboy, decided to order one. Add that I had just seen Woodsmonkey's review and was smitten. Let me tell you first, it's an improved copy of the 18" Condor machete and is almost twice the price. ESEE adds their own blade treatment and micarta handle, but other than that it's the same. The reason why I support ESEE regardless of price is outlined a bit later.

So it came and it was of course, razor sharp. I mean shaving sharp (which was an issue later on). The handle is a tad bit long for my hand but is really comfortable. The sheath was a fairly inexpensive cordura type that I'm not a big fan of, but it'll do for now. The whole feel of the machete, the balance and the handle together is just awesome.

Now, I was going to wait until the lease work day to try it out, but I was excited about it and took it trailblazing with the dog in tow. It was great, felling 1-2" saplings with one swing and up to 5" with relative ease, so chopping down frame materials are no issue at all. Clearing vines and palmetto was nothing. I did this for about two and a half hours and had a blast. At least in my AO and for my purposes a machete was going to fit the bill perfectly. But the real test was going to be using it as the only clearing/hacking/cutting tool on the work weekend for our deer lease in South Carolina.

So as promised I took the ESEE Lite Machete to do some trail clearing during our work weekend. We cut pine, maple, trimmed up (hacked of 4" branches) of scrub oak. My dad once stopped hacking with it to say "that's a dang good machete!", and he is not easily impressed. While putting up his ladder stand on a new area he had never hunted he realized that although the area was perfect with two clear lanes, a food plot not far, when he climbed up and looked out he hadn't counted on one single old maple to be blocking about 90 degrees of shooting. From the ground it wasn't in the way, but its leaves at 15-20ft definitely were. My dad thought we could "bend" it back but it was 7-9" thick and we didn't have enough rope to throw over. I said "let's hack it down", now my little brother says there's no way the machete could take it, accepting the challenge of it I said I could do it in less than five minutes. So I started hacking down into the tree at about 54 inches, then started wedging up. I was making good time but got out of breath and dad took over. Within two more minutes the thick maple was down.

We were all sold at that point. The ESEE Lite Machete had taken three hard days of serious abuse taking down hard and soft wood up to maybe nine inches thick and had come out begging for more. I will never need that size wood while scouting or bushcrafting, but it's great to know that this machete's performance will far exceed my needs. I am so impressed with the performance here that I am going to perform Colhane's mods and possibly purchase or make a good leather scabbard for this blade because it's coming with me every time now. The only thing this baby doesn't do is baton and split wood, it's also quite large for delicate tasks. So I'm going to really evaluate what other blades I need. My Izula is utterly unnoticed while on my neck and it takes an edge so quick that its a must have. So the question really is, is my RC-4 past it's prime or do I really need a specific batoning blade?

The issue: The first day I had used the machete I noticed some denting/chipping on the blade. It didn't effect performance but it still concerned me so I emailed ESEE's info address asking if they knew of any bad batches or how they preferred to re-profile the edge. Amazingly the very next day I go an email from Jeff Randall himself (owner) and through the day we isolated the issue to a very severe grind leading to a super thin edge and a possible heat treat issue. He told me how to fix the edge and said he'd send me a new machete immediately. That's the kind of service I like and it's why time again I will order from smaller American owned businesses with a reputation for pride in their products.

5Jul/100

Gear Review (video) – 5.11 Rush 12 pack

Note - I didn't realize the lighting was so horrible so I'll be doing another video outdoors in the next day or so.

I've been using this pack for about two weeks for a mix of EDC and some bushcrafting. It is a great size option when you think something like a Maxpedition Condor or Rush 24 is too big. I would use it as a secondary scout bag except for the quality. It's just not on par with Maxpedition. On my 5.11 Rush 24 I had a seam split on the hydration carrier pocket. Not sure how it happened, either.

This bag is from the first production run in which the only color choice was black (not my first choice). I'm not sure if the next production run coming out later this month will have other options.

My experience with this bag thus far has done two things: Reaffirmed my wish of a two-strap Maxpedition Sitka (please guys, I'll put up the preorder money today!), and that 5.11 products should be kept for med/light use. The QC just seems to be hit or miss.

The point - Great EDC bag, but not stout enough for serious bushcrafting.

Organization: 4.25/5
Comfort: 4.5/5
Build Quality: 3.5/5
Value: 4.25/5

28Jun/100

Gear Review – Using the Rat/ESEE Izula to baton wood

Not a full review but the first time I have used the Izula to split wood. It's small and needs alot of adjusting due to the small "target" size, but it will take some serious abuse.

28Jun/100

Video – Why I chop standing wood rather than baton it

I had been asked in the video using the Rat RC-4 to chop down a sapling why I chop rather than baton. The reason is because the angle of approach is odd unless the knife and desired cut is above your shoulder line, as the swing would be underhand and not a "hammer".

28Jun/100

Gear Review – Video of the Maxpedition Sitka

This is not an in-depth review, but rather a short review due to a poster on the Zombie Squad forums asking about using the Fatboy on short hikes. I told him I preferred the Sitka, and here's why.

You see it used here as a scout pack.

24Jun/100

Video – Using the ESEE/Rat RC-4 to cut down a pine sapling

I am not really liking the editing software that Kodak includes with the Playsport camera. Too bad, because the camera is awesome - except for the fact that it records in .MOV and Windows Movie Maker won't accept it and the converters I have are not playing nice. Anyways, I thought before I took the camera back I'd throw a video onto the new Youtube channel.

The video is me using a Rat RC-4 (pre-ESEE) that had just been sharpened using the new Spyderco Sharpmaker and it's 40 degree setting, then a fine touch with the 30 degree setting. It's not shaving sharp as I thought it'd be, probably my own error, but it's plenty sharp for shelter making.

Note: The video seems to be playing faster than real time. I don't know why.

Some comments from forums have made me expand upon the video - this text is now in the description on Youtube-

www.TheChristianSurvivalGuide.com

Using my (ESEE) Rat RC-4 that had just been sharpened by a Spyderco Sharpmaker. 1/4 mile from road so some noise. I did have permission to be on the property and taking a sapling was not an issue.

The sapling was rougly 3.7" diameter, not that big but thick enough that it could not be bent and cut.

Yes, I know, a knife isn't the best chopping tool. But a 3-6" fixed blade is common carry in the woods, an axe or hatchet is not due to size and weight. If I carried a larger and heavier kit in the bush, it would contain a hatchet, but I don't, so I use this.

Yes, a larger knife would be better for chopping. But then again we could circle around to the axe/hatchet argument.